Win4IcomSuite Archives - Win4IcomSuite for Icom Radios https://icom.va2fsq.com/category/win4icomsuite/ The Ultimate Control Software for the IC-7300, IC-7610, IC-7600, IC-7850, IC-7851 and IC-705 Thu, 22 Oct 2020 19:44:40 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 Ultimate Control https://icom.va2fsq.com/ultimate-control/ Wed, 25 Apr 2018 01:04:37 +0000 http://icom.va2fsq.com/?p=38 Win4IcomSuite works with the IC-7300, IC-7610 and others to follow.

The post Ultimate Control appeared first on Win4IcomSuite for Icom Radios.

]]> The Ultimate Control Software for your Icom Radio

Win4IcomSuite works with the IC-7100, IC-7300, IC-7600, IC-7610, IC-7700, IC-7800, IC-7850/51,IC-9700 and IC-705.

Best viewed at 1080p fullscreen

The post Ultimate Control appeared first on Win4IcomSuite for Icom Radios.

]]> Software Integration https://icom.va2fsq.com/software-integration/ Mon, 23 Apr 2018 21:30:35 +0000 http://icom.va2fsq.com/?p=201 Win4Icom Suite has 6 built in Virtual Radios

The post Software Integration appeared first on Win4IcomSuite for Icom Radios.

]]> Win4Icom Suite integrates with all software using virtual radios.  Up to 6 applications can run simultaneously with one USB connection

The post Software Integration appeared first on Win4IcomSuite for Icom Radios.

]]> Hardware Integration https://icom.va2fsq.com/hardware-integration/ Mon, 23 Apr 2018 10:53:26 +0000 http://icom.va2fsq.com/?p=42 Supports antenna tuners, amplifiers and anything else

The post Hardware Integration appeared first on Win4IcomSuite for Icom Radios.

]]> Win4IcomSuite Interfaces with Both Passive and Active Hardware Devices

Win4IcomSuite has built in virtual ports that appear to the outside world as real Icom radios.  All you need to do is plug in your hardware device into a serial port on your computer and then connect one of the Win4Icom virtual ports to this serial port.  If your device actively polls it is ready to go.  If it listens passively you can tell Win4Icom to send frequency, mode and filter commands automatically, keeping your device in full synchronization with your radio.

 

 

The post Hardware Integration appeared first on Win4IcomSuite for Icom Radios.

]]>